Whelen Lights

Side Left Tail

Dogs Show Their Amicable Attitude By Swinging Tails To Left

As is known to all, dogs often prick up their ears or tails wagging cheerfully to show amicable attitude to people, however, the way of a dog wags its tail is not as simple as people might imagine.

�

A research team, which is a department of Biology from the University of Victoria in Canada, found that the dogs' tails should tend to put the left when they come across similar unfamiliar dogs, the same case in the neutral stimuli, when they feel the stimulation from heterogeneous such as master, strangers or cats, the dog's tail tend to swing to the right. Therefore, the way of the tail swing to the left may be a dog more friendly, intimate performance. The researchers used a robotic dog model to discover the response when they meet the similar, the tail turns left or right. The robotic dog model which is wrapped by imitation leather is with the ture size of a dog, through the built-in drivers, the researchers can control its tail swing by using remote control.

�

In the process of the study, the researchers put more than 500 dogs close to the robotic dog model and recorded the dogs behavioral responses, by this way, they can found whether there is a hesitation when the dogs near the model, because the rows and pause prior to the interruption is likely to be lack of confidence, surprised and bewildered, and afraid of performance. The results showed that when the tail swing to the left, most of the dogs constantly approached the model without hesitation, when the tail swing to the right, a lot of dogs close to the model of a dog with more cautious.

�

By the way, there is another new research which is from British show that the different groups of people to take preventive measures are not the same enthusiasm when the influenza A H1N1 broken out. Generally speaking, women and the elderly will be more active in taking preventive measures. This finding could help health officials in the design epidemic prevention and control strategies. They found that women, the elderly and the relatively high level of education were more willing to take hand-washing or playing preventive measures such as vaccines.

�

�

About the Author

Copyright by Manu Wallace. We promise to offer Links of London Discount with most reasonable prices and excellent quality. At the same time, our best service will be available for you when you purchase our Links London Earrings. Do not hesitate any more, place an order quickly. I am sure you will enjoy your shopping at here.

Tail Lamp by Crown Automotive $98.99 Left Side; Tail Lamp by Crown Automotive

Esteem Synergy Drainable Pouch with InvisiClose Tail Closure, Left Side, Opaque, Small, 20/Bx $83.75 * Small: Fits up to 1 3/8" stoma. * 12" Left-side pouch. * Opaque. * One-sided comfort panel. * 30 filter covers per box. Esteem synergy drainable pouches are also available with the InvisiClose tail closure system. Designed to be best in class, the InvisiClose clipless tail closure offers double security, ease of drainage, comfort and cleanliness. The easy to open outlet end strips and tail design help control flow and reduce splashing. The locking mechanism is enhanced by an additional security flap for added peace of mind.

Esteem Synergy Drainable Pouch with InvisiClose Tail Closure, Left Side, Opaque, Large, 20/Bx $80.19 * Large: Fits up to 2 3/8" stoma. * 12" Left-side pouch. * Opaque. * One-sided comfort panel. * 30 filter covers per box. Esteem synergy drainable pouches are also available with the InvisiClose tail closure system. Designed to be best in class, the InvisiClose clipless tail closure offers double security, ease of drainage, comfort and cleanliness. The easy to open outlet end strips and tail design help control flow and reduce splashing. The locking mechanism is enhanced by an additional security flap for added peace of mind.

Esteem Synergy Drainable Pouch with InvisiClose Tail Closure, Left Side, Opaque, Medium, 20/Bx $85.34 * Medium: Fits up to 1 7/8" stoma. * 12" Left-side pouch. * Opaque. * One-sided comfort panel. * 30 filter covers per box. Esteem synergy drainable pouches are also available with the InvisiClose tail closure system. Designed to be best in class, the InvisiClose clipless tail closure offers double security, ease of drainage, comfort and cleanliness. The easy to open outlet end strips and tail design help control flow and reduce splashing. The locking mechanism is enhanced by an additional security flap for added peace of mind.

Rieger Fiat 500 RearApron - Rear apron for tail pipes left side $265 Data:suitable for all models Material: ABS-Plastic Scope of Delivery:Rear apronand installation material Rieger Tuning The design of new products, the model construction, the tool engineering and finally the series production of the ABS-parts is carried out in the House of Rieger. The design team consists of the sales team, which has the ideas, the garage team, which judges the feasibility and, as the last instance, the chief designer Toni Rieger, who finally decides how it will be done. The model-and toolconstruction is carried out by experienced specialists from the Rieger garage. In addition to that all molds for the production of the deep drawing tools are manufactured by Rieger themselves. Since 2001 the Rieger products have been made with the help of a fully automatic deep drawing system. At Rieger, the cutting of the manufactured ABS-parts is carried out with an absolute exact CNC-milling machine, which ensures a constant fit of the ABS-parts. 85% of all offered car body parts are manufactured by Rieger themselves. At the moment, about 90% of the Rieger products yet consist of recycable ABS synthetic material and are produced with the deep drawing system. ABS synthetic parts have a spray friendly surface, which does not has to be time-consumingly prepared before being sprayed. The price-/quality relation of the Rieger products is leading at the tuning market. Top quality at fair prices!

Winnie the Pooh Tigger Ears and Tail Set $9.99 Winnie the Pooh Tigger Ears and Tail Set. This Tigger Ears and Tail Set is made of super-soft velboa faux-fur. Features embroidered Tigger artwork on the left side of the headband ears. Order yours today!

Left Side Of The Brain $9.49 Left Side Of The Brain

Left And Right Side Er-10 $108.99 LEFT AND RIGHT SIDE ER-10

ESCLS Left Side Exhaust $230 ESCLS Left Side Exhaust System

Winnie the Pooh Eeyore Ears and Tail Set $9.99 Winnie the Pooh Eeyore Ears and Tail Set. This Eeyore Ears and Tail Set is made of super-soft velboa faux-fur. Features embroidered Eeyore artwork on the left side of the headband ears. Order yours today! Ages 3 and up.

Bosch TS1003 Left Side Support $29.99 Left Side Support - TS1003

Desk,Ped Left Side,Dwt $316.99 DESK,PED LEFT SIDE,DWT

Left Side Mirror $26.28 Left side mirror, in black. Mirror Thread Size: M8x1.5 (Regular Thread)

Wesbar / Wesbar Left Hand LED Wrap Around Tail Light / 281595 $38.65 Wesbar - Wesbar Left Hand LED Wrap Around Tail Light - 281595

Tail Light Panel $43.99 Tail Light Panel; LH(Driver) Side;

Rieger BMW E46 3series Coupe/Cabrio/Sedan Rear Bumper - Rear diffuser for double tail pipes left side $189 Data: suitable for Coupe, Cabrio and Sedan Material: ABS-Plastic Optional:Rear diffuser Note: The Rieger rear bumper (50248, 50249, 50250 or 50251) can be fitted only in conjunction with the Rieger rear diffuser (50252, 50253 or 50254) Scope of Delivery: Rear bumper and installation material Rieger Tuning The design of new products, the model construction, the tool engineering and finally the series production of the ABS-parts is carried out in the House of Rieger. The design team consists of the sales team, which has the ideas, the garage team, which judges the feasibility and, as the last instance, the chief designer Toni Rieger, who finally decides how it will be done. The model-and toolconstruction is carried out by experienced specialists from the Rieger garage. In addition to that all molds for the production of the deep drawing tools are manufactured by Rieger themselves. Since 2001 the Rieger products have been made with the help of a fully automatic deep drawing system. At Rieger, the cutting of the manufactured ABS-parts is carried out with an absolute exact CNC-milling machine, which ensures a constant fit of the ABS-parts. 85% of all offered car body parts are manufactured by Rieger themselves. At the moment, about 90% of the Rieger products yet consist of recycable ABS synthetic material and are produced with the deep drawing system. ABS synthetic parts have a spray friendly surface, which does not has to be time-consumingly prepared before being sprayed. The price-/quality relation of the Rieger products is leading at the tuning market. Top quality at fair prices!

Rieger Opel Astra H Rear Apron - Rear apron for standard tail pipe left side $289 Data:suitable for 5-door andOPC Material: ABS-Plastic Scope of Delivery: Rear apron, alu mesh and installation material Rieger Tuning The design of new products, the model construction, the tool engineering and finally the series production of the ABS-parts is carried out in the House of Rieger. The design team consists of the sales team, which has the ideas, the garage team, which judges the feasibility and, as the last instance, the chief designer Toni Rieger, who finally decides how it will be done. The model-and toolconstruction is carried out by experienced specialists from the Rieger garage. In addition to that all molds for the production of the deep drawing tools are manufactured by Rieger themselves. Since 2001 the Rieger products have been made with the help of a fully automatic deep drawing system. At Rieger, the cutting of the manufactured ABS-parts is carried out with an absolute exact CNC-milling machine, which ensures a constant fit of the ABS-parts. 85% of all offered car body parts are manufactured by Rieger themselves. At the moment, about 90% of the Rieger products yet consist of recycable ABS synthetic material and are produced with the deep drawing system. ABS synthetic parts have a spray friendly surface, which does not has to be time-consumingly prepared before being sprayed. The price-/quality relation of the Rieger products is leading at the tuning market. Top quality at fair prices!

Rieger Opel Astra H Rear Apron - Rear apron for double tail pipes left side $289 Data:suitable for 5-door andOPC Material: ABS-Plastic Scope of Delivery: Rear apron, alu mesh and installation material Rieger Tuning The design of new products, the model construction, the tool engineering and finally the series production of the ABS-parts is carried out in the House of Rieger. The design team consists of the sales team, which has the ideas, the garage team, which judges the feasibility and, as the last instance, the chief designer Toni Rieger, who finally decides how it will be done. The model-and toolconstruction is carried out by experienced specialists from the Rieger garage. In addition to that all molds for the production of the deep drawing tools are manufactured by Rieger themselves. Since 2001 the Rieger products have been made with the help of a fully automatic deep drawing system. At Rieger, the cutting of the manufactured ABS-parts is carried out with an absolute exact CNC-milling machine, which ensures a constant fit of the ABS-parts. 85% of all offered car body parts are manufactured by Rieger themselves. At the moment, about 90% of the Rieger products yet consist of recycable ABS synthetic material and are produced with the deep drawing system. ABS synthetic parts have a spray friendly surface, which does not has to be time-consumingly prepared before being sprayed. The price-/quality relation of the Rieger products is leading at the tuning market. Top quality at fair prices!

Rieger Ford Mondeo BA7 Rear Apron SG-Design - Rear apron for tail pipes left/right side $285 Data: from year 2007 , suitable for Turnier Material: ABS-Plastic Scope of Delivery:Rear apron, alu meshand installation material Rieger Tuning The design of new products, the model construction, the tool engineering and finally the series production of the ABS-parts is carried out in the House of Rieger. The design team consists of the sales team, which has the ideas, the garage team, which judges the feasibility and, as the last instance, the chief designer Toni Rieger, who finally decides how it will be done. The model-and toolconstruction is carried out by experienced specialists from the Rieger garage. In addition to that all molds for the production of the deep drawing tools are manufactured by Rieger themselves. Since 2001 the Rieger products have been made with the help of a fully automatic deep drawing system. At Rieger, the cutting of the manufactured ABS-parts is carried out with an absolute exact CNC-milling machine, which ensures a constant fit of the ABS-parts. 85% of all offered car body parts are manufactured by Rieger themselves. At the moment, about 90% of the Rieger products yet consist of recycable ABS synthetic material and are produced with the deep drawing system. ABS synthetic parts have a spray friendly surface, which does not has to be time-consumingly prepared before being sprayed. The price-/quality relation of the Rieger products is leading at the tuning market. Top quality at fair prices!

Rieger Audi A4 B8 Rear Apron - Rear apron for standard tail pipes left/right side $313 Data: not suitable for S-Line Material:ABS-Plastic Scope of Delivery:Rear apron, alu meshand installation material Rieger Tuning The design of new products, the model construction, the tool engineering and finally the series production of the ABS-parts is carried out in the House of Rieger. The design team consists of the sales team, which has the ideas, the garage team, which judges the feasibility and, as the last instance, the chief designer Toni Rieger, who finally decides how it will be done. The model-and toolconstruction is carried out by experienced specialists from the Rieger garage. In addition to that all molds for the production of the deep drawing tools are manufactured by Rieger themselves. Since 2001 the Rieger products have been made with the help of a fully automatic deep drawing system. At Rieger, the cutting of the manufactured ABS-parts is carried out with an absolute exact CNC-milling machine, which ensures a constant fit of the ABS-parts. 85% of all offered car body parts are manufactured by Rieger themselves. At the moment, about 90% of the Rieger products yet consist of recycable ABS synthetic material and are produced with the deep drawing system. ABS synthetic parts have a spray friendly surface, which does not has to be time-consumingly prepared before being sprayed. The price-/quality relation of the Rieger products is leading at the tuning market. Top quality at fair prices!

Rieger Audi A4 B8 Rear Apron - Rear apron for double tail pipes left side $313 Data: not suitable for S-Line Material:ABS-Plastic Scope of Delivery:Rear apron, alu meshand installation material Rieger Tuning The design of new products, the model construction, the tool engineering and finally the series production of the ABS-parts is carried out in the House of Rieger. The design team consists of the sales team, which has the ideas, the garage team, which judges the feasibility and, as the last instance, the chief designer Toni Rieger, who finally decides how it will be done. The model-and toolconstruction is carried out by experienced specialists from the Rieger garage. In addition to that all molds for the production of the deep drawing tools are manufactured by Rieger themselves. Since 2001 the Rieger products have been made with the help of a fully automatic deep drawing system. At Rieger, the cutting of the manufactured ABS-parts is carried out with an absolute exact CNC-milling machine, which ensures a constant fit of the ABS-parts. 85% of all offered car body parts are manufactured by Rieger themselves. At the moment, about 90% of the Rieger products yet consist of recycable ABS synthetic material and are produced with the deep drawing system. ABS synthetic parts have a spray friendly surface, which does not has to be time-consumingly prepared before being sprayed. The price-/quality relation of the Rieger products is leading at the tuning market. Top quality at fair prices!

Rieger Audi A5 B8 Rear Apron - Rear apron for standard tail pipes left/right side $313 Data: not suitable for S-Line and S5 Material:ABS-Plastic Scope of Delivery:Rear apron, alu meshand installation material Rieger Tuning The design of new products, the model construction, the tool engineering and finally the series production of the ABS-parts is carried out in the House of Rieger. The design team consists of the sales team, which has the ideas, the garage team, which judges the feasibility and, as the last instance, the chief designer Toni Rieger, who finally decides how it will be done. The model-and toolconstruction is carried out by experienced specialists from the Rieger garage. In addition to that all molds for the production of the deep drawing tools are manufactured by Rieger themselves. Since 2001 the Rieger products have been made with the help of a fully automatic deep drawing system. At Rieger, the cutting of the manufactured ABS-parts is carried out with an absolute exact CNC-milling machine, which ensures a constant fit of the ABS-parts. 85% of all offered car body parts are manufactured by Rieger themselves. At the moment, about 90% of the Rieger products yet consist of recycable ABS synthetic material and are produced with the deep drawing system. ABS synthetic parts have a spray friendly surface, which does not has to be time-consumingly prepared before being sprayed. The price-/quality relation of the Rieger products is leading at the tuning market. Top quality at fair prices!

Rieger Audi A1 8X Rear Diffuser - Rear diffuser ABS for standard double tail pipe left side $189 Data:from year 08/'10 , 3-door, only for vehicles without S-Line Material: ABS-Plastic Scope of Delivery: Rear diffuser and installation material Rieger Tuning The design of new products, the model construction, the tool engineering and finally the series production of the ABS-parts is carried out in the House of Rieger. The design team consists of the sales team, which has the ideas, the garage team, which judges the feasibility and, as the last instance, the chief designer Toni Rieger, who finally decides how it will be done. The model-and toolconstruction is carried out by experienced specialists from the Rieger garage. In addition to that all molds for the production of the deep drawing tools are manufactured by Rieger themselves. Since 2001 the Rieger products have been made with the help of a fully automatic deep drawing system. At Rieger, the cutting of the manufactured ABS-parts is carried out with an absolute exact CNC-milling machine, which ensures a constant fit of the ABS-parts. 85% of all offered car body parts are manufactured by Rieger themselves. At the moment, about 90% of the Rieger products yet consist of recycable ABS synthetic material and are produced with the deep drawing system. ABS synthetic parts have a spray friendly surface, which does not has to be time-consumingly prepared before being sprayed. The price-/quality relation of the Rieger products is leading at the tuning market. Top quality at fair prices!

Rieger Audi A5 B8 Rear Apron - Rear apron for double tail pipes left side $313 Data: not suitable for S-Line and S5 Material:ABS-Plastic Scope of Delivery:Rear apron, alu meshand installation material Rieger Tuning The design of new products, the model construction, the tool engineering and finally the series production of the ABS-parts is carried out in the House of Rieger. The design team consists of the sales team, which has the ideas, the garage team, which judges the feasibility and, as the last instance, the chief designer Toni Rieger, who finally decides how it will be done. The model-and toolconstruction is carried out by experienced specialists from the Rieger garage. In addition to that all molds for the production of the deep drawing tools are manufactured by Rieger themselves. Since 2001 the Rieger products have been made with the help of a fully automatic deep drawing system. At Rieger, the cutting of the manufactured ABS-parts is carried out with an absolute exact CNC-milling machine, which ensures a constant fit of the ABS-parts. 85% of all offered car body parts are manufactured by Rieger themselves. At the moment, about 90% of the Rieger products yet consist of recycable ABS synthetic material and are produced with the deep drawing system. ABS synthetic parts have a spray friendly surface, which does not has to be time-consumingly prepared before being sprayed. The price-/quality relation of the Rieger products is leading at the tuning market. Top quality at fair prices!

Rieger Audi A5 B8 Rear Apron - Rear apron for standard tail pipe left side $313 Data: not suitable for S-Line and S5 Material:ABS-Plastic Scope of Delivery:Rear apron, alu meshand installation material Rieger Tuning The design of new products, the model construction, the tool engineering and finally the series production of the ABS-parts is carried out in the House of Rieger. The design team consists of the sales team, which has the ideas, the garage team, which judges the feasibility and, as the last instance, the chief designer Toni Rieger, who finally decides how it will be done. The model-and toolconstruction is carried out by experienced specialists from the Rieger garage. In addition to that all molds for the production of the deep drawing tools are manufactured by Rieger themselves. Since 2001 the Rieger products have been made with the help of a fully automatic deep drawing system. At Rieger, the cutting of the manufactured ABS-parts is carried out with an absolute exact CNC-milling machine, which ensures a constant fit of the ABS-parts. 85% of all offered car body parts are manufactured by Rieger themselves. At the moment, about 90% of the Rieger products yet consist of recycable ABS synthetic material and are produced with the deep drawing system. ABS synthetic parts have a spray friendly surface, which does not has to be time-consumingly prepared before being sprayed. The price-/quality relation of the Rieger products is leading at the tuning market. Top quality at fair prices!

Rieger Audi A5 B8 Rear Apron (S-Line) - Rear apron for standard tail pipe left side $313 Data:suitable for S-Line and S5 Material:ABS-Plastic Scope of Delivery:Rear apron, alu meshand installation material Rieger Tuning The design of new products, the model construction, the tool engineering and finally the series production of the ABS-parts is carried out in the House of Rieger. The design team consists of the sales team, which has the ideas, the garage team, which judges the feasibility and, as the last instance, the chief designer Toni Rieger, who finally decides how it will be done. The model-and toolconstruction is carried out by experienced specialists from the Rieger garage. In addition to that all molds for the production of the deep drawing tools are manufactured by Rieger themselves. Since 2001 the Rieger products have been made with the help of a fully automatic deep drawing system. At Rieger, the cutting of the manufactured ABS-parts is carried out with an absolute exact CNC-milling machine, which ensures a constant fit of the ABS-parts. 85% of all offered car body parts are manufactured by Rieger themselves. At the moment, about 90% of the Rieger products yet consist of recycable ABS synthetic material and are produced with the deep drawing system. ABS synthetic parts have a spray friendly surface, which does not has to be time-consumingly prepared before being sprayed. The price-/quality relation of the Rieger products is leading at the tuning market. Top quality at fair prices!

Rieger Audi S5 B8 Rear Apron - Rear apron for standard tail pipes left/right side $313 Data:suitable for S-Line and S5 Material:ABS-Plastic Scope of Delivery:Rear apron, alu meshand installation material Rieger Tuning The design of new products, the model construction, the tool engineering and finally the series production of the ABS-parts is carried out in the House of Rieger. The design team consists of the sales team, which has the ideas, the garage team, which judges the feasibility and, as the last instance, the chief designer Toni Rieger, who finally decides how it will be done. The model-and toolconstruction is carried out by experienced specialists from the Rieger garage. In addition to that all molds for the production of the deep drawing tools are manufactured by Rieger themselves. Since 2001 the Rieger products have been made with the help of a fully automatic deep drawing system. At Rieger, the cutting of the manufactured ABS-parts is carried out with an absolute exact CNC-milling machine, which ensures a constant fit of the ABS-parts. 85% of all offered car body parts are manufactured by Rieger themselves. At the moment, about 90% of the Rieger products yet consist of recycable ABS synthetic material and are produced with the deep drawing system. ABS synthetic parts have a spray friendly surface, which does not has to be time-consumingly prepared before being sprayed. The price-/quality relation of the Rieger products is leading at the tuning market. Top quality at fair prices!

Rieger Audi S5 B8 Rear Apron - Rear apron for double tail pipes left side $313 Data:suitable for S-Line and S5 Material:ABS-Plastic Scope of Delivery:Rear apron, alu meshand installation material Rieger Tuning The design of new products, the model construction, the tool engineering and finally the series production of the ABS-parts is carried out in the House of Rieger. The design team consists of the sales team, which has the ideas, the garage team, which judges the feasibility and, as the last instance, the chief designer Toni Rieger, who finally decides how it will be done. The model-and toolconstruction is carried out by experienced specialists from the Rieger garage. In addition to that all molds for the production of the deep drawing tools are manufactured by Rieger themselves. Since 2001 the Rieger products have been made with the help of a fully automatic deep drawing system. At Rieger, the cutting of the manufactured ABS-parts is carried out with an absolute exact CNC-milling machine, which ensures a constant fit of the ABS-parts. 85% of all offered car body parts are manufactured by Rieger themselves. At the moment, about 90% of the Rieger products yet consist of recycable ABS synthetic material and are produced with the deep drawing system. ABS synthetic parts have a spray friendly surface, which does not has to be time-consumingly prepared before being sprayed. The price-/quality relation of the Rieger products is leading at the tuning market. Top quality at fair prices!

Rieger Audi S5 B8 Rear Apron - Rear apron for standard tail pipe left side $313 Data:suitable for S-Line and S5 Material:ABS-Plastic Scope of Delivery:Rear apron, alu meshand installation material Rieger Tuning The design of new products, the model construction, the tool engineering and finally the series production of the ABS-parts is carried out in the House of Rieger. The design team consists of the sales team, which has the ideas, the garage team, which judges the feasibility and, as the last instance, the chief designer Toni Rieger, who finally decides how it will be done. The model-and toolconstruction is carried out by experienced specialists from the Rieger garage. In addition to that all molds for the production of the deep drawing tools are manufactured by Rieger themselves. Since 2001 the Rieger products have been made with the help of a fully automatic deep drawing system. At Rieger, the cutting of the manufactured ABS-parts is carried out with an absolute exact CNC-milling machine, which ensures a constant fit of the ABS-parts. 85% of all offered car body parts are manufactured by Rieger themselves. At the moment, about 90% of the Rieger products yet consist of recycable ABS synthetic material and are produced with the deep drawing system. ABS synthetic parts have a spray friendly surface, which does not has to be time-consumingly prepared before being sprayed. The price-/quality relation of the Rieger products is leading at the tuning market. Top quality at fair prices!

Rieger Fiat 500 RearApron - Rear apron for tail pipes left/right side $265 Data:suitable for all models Material: ABS-Plastic Scope of Delivery:Rear apronand installation material Rieger Tuning The design of new products, the model construction, the tool engineering and finally the series production of the ABS-parts is carried out in the House of Rieger. The design team consists of the sales team, which has the ideas, the garage team, which judges the feasibility and, as the last instance, the chief designer Toni Rieger, who finally decides how it will be done. The model-and toolconstruction is carried out by experienced specialists from the Rieger garage. In addition to that all molds for the production of the deep drawing tools are manufactured by Rieger themselves. Since 2001 the Rieger products have been made with the help of a fully automatic deep drawing system. At Rieger, the cutting of the manufactured ABS-parts is carried out with an absolute exact CNC-milling machine, which ensures a constant fit of the ABS-parts. 85% of all offered car body parts are manufactured by Rieger themselves. At the moment, about 90% of the Rieger products yet consist of recycable ABS synthetic material and are produced with the deep drawing system. ABS synthetic parts have a spray friendly surface, which does not has to be time-consumingly prepared before being sprayed. The price-/quality relation of the Rieger products is leading at the tuning market. Top quality at fair prices!