Whelen Lights

Light Lense Driver

Honda Park Light: More Than Just for Parking

Many car accidents happen due to the drivers’ inability to clearly see the road ahead. Snowstorms, heavy rains, and insufficient street lighting can make it very difficult for them to see beyond a few meters. This is why your Honda car has a wide array of features that provide illumination as well as increase its conspicuity. One of these important features is the Honda park light.

Often sporting either a bright orange or red color, a Honda park light does more than what its name suggests. More than a tool that allows you to estimate the distance between your car and the wall you are backing up to, a Honda park light alerts motorists behind you of your presence.

For example, whenever you press on the brakes, each Honda park light turns bright to inform others that you are slowing down or coming to a complete stop. Moreover, it complements the brightness of your Honda tail lights and blinks simultaneously with these so that if you are stranded or going in reverse, you can be spotted immediately. Also, Honda park lights can usually be set to blink in sync with your Honda turning signal to indicate your intention to turn or change lanes. All in all, Honda park lights make your position and movement on the street more visible, thereby increasing over-all road safety.

Road safety is so important that laws are enacted to punish motorists who fail to replace broken park light lenses or burnt-out park light bulbs. Did you know that unless your car is only for show, you can choose park light colors that are only allowed by the law? Such rules and regulations are there for your protection as well as those of other motorists. Therefore, it is imperative that you replace broken park lights with new Honda park lights without delay.

About the Author

Anthony Fontanelle is a 35-year-old automotive buff who grew up in the Windy City. He does freelance work for an automotive magazine when he is not busy customizing cars in his shop.

Fog Light by Omix-Ada $82.99 1999-04 WJ Grand Cherokee;Clear lense;Driver side;Sold individually

Fog Light Assembly by Omix-Ada $111.99 1993-95 XJ Cherokee;Clear lense;Driver or passenger side;Sold individually

Aqua Light Colored Lense Kit $19.95 Optional colored lenses for Aqua Light underwater lighting. Four colors per pack: blue, green, yellow, and red.

Photography, Lense $39.99 Photography, Lense - Giclee Print

LEDme Driver by WAC Lighting $35.91 The WAC Lighting LEDme Driver is a "plug and play" terminal block designed to deliver a compact and reliable constant current LED power supply for the WAC Lighting LEDme Button Lights (up to 4 lights, depending on driver selected). Features surge protection and short circuit protection. Has a 350mA Constant Current for the LEDs' optimized and stable performance. WAC Lighting, founded in 1984, has developed a strong reputation for high quality decorative and task lighting. Based in Garden City, New York, WAC Lighting is a leading manufacturer of low voltage, line voltage and LED lighting, including track systems, transformers, lamps, cabinet lighting and recessed downlights. The WAC Lighting LEDme Drivers is available with the following: Details:Designed for use with the WAC Lighting LEDme Button LightsSurge protectionShort circuit protectionDimable version availableOutput current: 350A DC constant current Loading wire: 22 AWG; 6' maximum lengthUL 60950 ListedOptions:Wattage: 3, 9 or 12 wattsWattage: 3 Watt option supplies 3 watts maximum; for up to 1 LEDme Button Light (sold separately). Input voltage: 120 Volt AC; Input current: .2A. Output voltage: 36 Volt DC.9 Watt option supplies 9 watts maximum; for up to 3 LEDme Button Lights (sold separately). Input voltage: 120 Volt AC; Input current: .15A. Output voltage: 24 Volt DC.12 Watt option supplies 12 watts maximum; for up to 4 LEDme Button Lights (sold separately). Input voltage: 120 Volt AC; Input current: .15A. Output voltage: 36 Volt DC.Shipping: This item usually ships within five business days. Dimensions: 3 Watt Option: Length 5.62 In., Height 1.12 In., Width 1.62 In. 12 Watt Option: Width 3.12 In., Length 7.12 In., Height 1.62 In. 9 Watt Option: Height 1.62 In., Length 7.12 In., Width 3.12 In.

Panasonic VW-W4607 Wide Conversion Lense $169.95 "Panasonic VW-W4607 Brand New, The Panasonic VW-W4607 0.7x wide conversion lens specifically designed to work with any camcorder lenses that have a 46mm filter thread. Moreover, with the extra wide 0.7x framing one can fit everyone in the group in the shot. VW-W4607 Features: 0.7x Wide Conversion Lens, Rear Diameter: 46 mm, Increases Field Of View, Multi-Coated Lens for Enhanced Light Transmission - w/ Flare & Glare Reduction, For Panasonic Models HDC-HS700K HDC-HS900K HDC-SD600K HDC-SD800K HDC-SDT750K HDC-TM700K HDC-TM900K"

10x30x50 Ruby Lense Zoom Binoculars $99.58 Never miss a thing with these zoom binoculars. These quality optics feature 10x30x50 magnification with zoom and ruby lenses for clearer vision in low light conditions.Ruby lensComes packed in a boxLens cleaner includedComes with a carrying pouchDimensions: 9 inches long x 4 inches wide

Nexus LED Landscape Lighting - DRIVER by Hinkley Lighting $498 The Hinkley Lighting Nexus LED Landscape Lighting -DRIVER, in combination with the Nexus LED Landscape lights, reduces excessive heat that could damage or diminish the LED light performance. Offers space for an optional plug-in timer. Works with a number of Nexus lights at any time, up to 150 watts. Cleveland-based Hinkley Lighting is driven by a passion to combine design and function to create exceptional lighting solutions. Family-owned Hinkley began as a traditional lantern company in 1922, and, still today, they produce top quality outdoor lighting. Hinkley Lighting has also expanded to include a full range of interior lighting solutions, including chandeliers, sconces, pendants and vanity lights. The Hinkley Lighting Nexus LED Landscape Lighting -DRIVER is available with the following: Details:Reduces excessive heat from Nexus LED landscape lightsLED wattage 150w maxOffers space for an optional plug-in timer (timer not included)Stainless Steel finishUL Listed for wet locationsShipping: This item usually ships within 7 days. Dimensions: Unit: Width 5.5 In., Height 17 In.

Design Pro LED Disc Connector/Driver Module by Kichler $55 Read first! This item is part of the Kichler Lighting Design Pro LED System. There are four steps to completing this Design Pro System; you have to configure-to-order this item. See below for details. The Kichler Design Pro LED Disc Connector/Driver Module can connect up to three Design Pro LED Discs. Since 1938, Cleveland-based Kichler Lighting has created exceptional lighting in a variety of styles, finishes, colors and designs. With a diverse collection of indoor and outdoor lighting in classic and contemporary styles, Kichler Lighting always focuses on making home lighting that is both beautiful and functional. This system requires additional steps for completion. Select and purchase additional needed parts from the list of related items below. To complete your Undercounter system, you need to select and purchase: Design Pro LED Light and/or Design Pro LED Disk Light, optional Dimming Switch or Nightlight, Interconnect Cables, and Power Supply. Please call customer service for any questions. This configure-to-order Design Pro System requires 4 steps for completion: (See below for more details.) Step 1. Select your choice of light fixture size and finish (Design Pro LED and/or Design Pro LED Disk), Disk Connector, optional Disc Wire Extension. Step 2. Select an optional Dimmer Switch or Nightlight. Step 3. Select quantity, size and finish of Interconnect Cables. Step 4. Select Power Supply. This is part of Step 1. DesignPro LED Light: From this page, select the desired size and finish of Lights you would like by adding each new style to the shopping cart and continuing to add to the cart until the desired number of lamps has been chosen. This is also a good time to select any Design Pro LED Disk fixtures for your configuration.Select the Design Pro LED Connector/Drive if you wish to connect up to three Design Pro LED Disks. After choosing your lights, select an optional Dimmer or Nightlight. If you do not wish to choose one, proceed to Step 3: Interconnect Cables. Step 2. Optional Dimmer Switch and Nightlight:Use a Dimming Switch to control the light level. Use a Nightlight when a low light level is desired. Next, select your Interconnect Cables. Step 3. Interconnect Cables: Click on the Interconnect Cables image from below. Select the quantity, size and finish of the Interconnect cables. For additional sizes, select item and add to cart one piece at a time. The Interconnect Cables connect multiple fixtures together. Next step is choosing your power supply option. Step 4. Power Supply: From below, select your desired Power Supply link. Choice includes: Under Cabinet Mounted Power Supply, Remote Control Power Supply (Design Pro Power Supply Lead needed with this option, options will appear on product page), or Plug-In Power Supply. The Kichler Lighting Design Pro LED Disc Connector/Driver Module is available with the following: Details:Made of PVC Connects up to 3 Design Pro LED discsUL ListedOptions:Color: Black (shown), or Whi

3M Lense Renewal Kit w/Protectant $29.95 The 3M Lens Renewal Kit with Protectant is an easy and affordable way to repair your vehicle's plastic lens surfaces. The kit contains various graded sanding pads, pad holders, buffing pads, polish, protectant, detailed instructions and 3M headlight masking tape. It includes everything you need to restore the automotive problem of dull headlights. The Lens Renewal Kit with Protectant can also be used to repair hazing on other plastic surfaces, including taillights, emergency light bars, plastic motorcycle lights, trailers, snowmobiles and more. The 3M Lens Renewal Kit with Protectant is easy to use and can be performed by anyone. First, clean the plastic surface to be worked on and tape around the body panels of your vehicle using the included 3M tape. Second, using a drill (1200-1600 rpm) with an attached 3M backing plate, sand away the hazed surface in a two-stage sanding process with the included sanding pads. Third, refine and reduce remaining visible scratches using a drill, 3M backing plate and the foam disc. Fourth, polish and buff your lenses using a drill, 3M backing plate with orange foam compounding pad attached and a small amount of 3M headlight lens polish. Lastly, apply the protectant formula to seal out the elements and maintain crystal clarity. In addition to the drill, you will also need a spray bottle and water used in the wet sanding and buffing processes. Otherwise, everything that you need is included in the kit. The entire process takes under an hour, depending on the extent of the damage.     Features: Requires as little as an hour to remove scratchesand restore cloudy, dull lenses Includes protectant formula that locks out theelements to keep your lights crystal clear Includes 25' of 3M premium masking tape May be used on most plastic lenses   Kit Includes: 1 - 3M drill backing plate 1 - 3M Masking Tape (25 ft.) 4 - White abrasive discs 6 - Yellow discs 1 - Trizact foam disc 1 - Orange foam compounding pad 1 - 1 oz. 3M headlight lens polish sample 1 - Container of protectant formula   Instructional Video:

Option Racing Headlights - Clear Lense [00-01 Camry] $255 Option Racing Headlights - Clear Lense

Roadpro RP1375ADL Diamond Lense 4x2 Dbl Bulb Light Amber $25.69 High Visibility LED Lamp with 2 Wire Connection12 LEDs on Printed Circuit BoardReplaceable High Impact SnapLock Lens2 Screw MountingInnovative Diamond Lens with Unique Cut Lens Maximizes LuminosityBrightest Safest LightGreater ShockResistance for Longer LifeRated for 100 000 HoursLow Current Draw

Roadpro RP1375RDL Diamond Lense 4x2 Dbl Bulb Light Red $25.69 High Visibility LED Lamp with 2 Wire Connection12 LEDs on Printed Circuit BoardReplaceable High Impact SnapLock Lens2 Screw MountingInnovative Diamond Lens with Unique Cut Lens Maximizes LuminosityBrightest Safest LightGreater ShockResistance for Longer LifeRated for 100 000 HoursLow Current Draw

LEDme Button Light by WAC Lighting $53.91 Part of WAC Lighting's premium line of LED lighting. Available in several finishes, the LEDme Button Light includes three 1 watt LED lamps (3000K) with a total output of 180 lumens. Requires an LEDme Driver (sold separately). This unobtrusive LED light has a potential life of 30,0000 hours. Thermally efficient, this undercabinet puck light can be used to light heat sensitive perishables as well as UV sensitive items. Ideal for kitchen counters and cabinets, curio cabinets, etageres and more. WAC Lighting, founded in 1984, has developed a strong reputation for high quality decorative and task lighting. Based in Garden City, New York, WAC Lighting is a leading manufacturer of low voltage, line voltage and LED lighting, including track systems, transformers, lamps, cabinet lighting and recessed downlights. The WAC Lighting LEDme Button Light is available with the following: Details:Beam spread glass shadeDie-cast aluminum housing for recess mountSteel housing for surface mountRequires an LEDme Driver (sold separately: see Related Items below)UL ListedOptions:Finish: Black, Brushed Nickel, Chrome, Copper Bronze (shown), Dark Bronze, or White.Lighting: Three 1 Watt 120 Volt LED lamps (included). Shipping: This item usually ships within five business days. Dimensions: Fixture: Height .75 In., Width 2.25 In.

Jeep Fog Light by Omix-Ada 12407.01 $99.99 1997-01 Jeep XJ Cherokee;Clear lense;Driver side;Sold individually JEEP CHEROKEE (XJ) COUNTRY SE SPORT 1997 1998 1999 2000 2001 2.5L (150) 4L Power Tech (242) GAS Jeep Fog Light by Omix-Ada 12407.01

Jeep Fog Light by Omix-Ada 12407.06 $88.99 1997-98 Jeep ZJ Grand Cherokee;Clear lense;Driver side;Sold individually JEEP GRAND CHEROKEE (ZJ) 5.9 LIMITED LAREDO LIMITED ORVIS TSI 1997 1998 4L Power Tech (242) 5.2L Magnum (318) 5.9L Magnum (360) GAS Jeep Fog Light by Omix-Ada 12407.06

Jeep Fog Light by Omix-Ada 12407.07 $103.99 2002-06 Jeep KJ Liberty;Clear lense;Driver side;Sold individually JEEP LIBERTY (KJ) LIMITED RENEGADE SPORT 2002 2003 2004 2.4L Power-Tech (148) 3.7L Power-Tech (226) GAS Jeep Fog Light by Omix-Ada 12407.07

Jeep Fog Light Assembly by Omix-Ada 12407.09 $111.99 1993-95 Jeep XJ Cherokee;Clear lense;Driver or passenger side;Sold individually JEEP CHEROKEE (XJ) COUNTRY SE SPORT 1993 1994 1995 2.5L (150) 4L Power Tech (242) GAS Jeep Fog Light Assembly by Omix-Ada 12407.09

OSI Pond Submersible Spot Lights One Lense $61.99 OSI Pond Submersible Spot Lights One Lense

Single Lense Glasses - Roboto $6.95 Nothing adds detail to a costume like accessories, and the right accessories will have you looking good and feeling great. These Single Lense Glasses capture the essence of the fashion and style of the 80s, so if you are going for that perfect look then you want these Single Lense Glasses. This pair of Single Lense Glasses features a futuristic fashion with graphite colored frames and single lens to give you that futuristic Roboto look. This Halloween complete the look you want and make sure your perfect costume has the perfect accessories to go with it.

The Driver $5.99 The Driver

Talak LED Wall Light by Artemide $875 A supremely functional light, the Artemide Talak LED Wall Light is adjustable in height as well as rotation. Simply move lamp up or down and 180 degrees side to side for the perfect lighting. Features thermoplastic in a Matte White powder coated finish. Since 1959, Artemide has created a wide array of modern table lamps, floor lamps, wall sconces and suspensions. Technologically advanced, and with styles ranging from clean and refined to sculptural and avant garde, many Artemide designs--especially the Tolomeo and Tizio--have become icons of contemporary lighting design. The Artemide Talak LED Wall Light is available with the following: Details:Thermoplastic shadeMatte White powder coated finishPolished Chrome steel stemWall bracket in die-cast aluminum suitable for mounting to solid wall surfaceShade rotates 180 degree on the horizontal planeHeight adjustable by sliding up and down stemOn/off dimmer switch on shadeLED driver on cordPlug-in or direct wire installationUL ListedMade in ItalyDesigned by Neil PoultonLighting: 80 LED array utilizing 8 Watts total (included). Shipping: This item usually ships within 1 week. Dimensions: Wall Bracket: Height 2.38 In., Width 2.38 In. Fixture: Height Adjustable to 24.25 In., Extension 33.5 In.

Roadpro RP1259DLA Led Diamond Lense Cat Eye Mrk Lgt. Ambr $25.7 Replaceable High Impact SnapLock Lens13 LEDs on Printed Circuit Board. White Polycarbonate Body. Brightest Safest Light. Unique Cut Lens Maximizes Luminosity. Greater ShockResistance for Longer Life. Rated for 100 000 HoursLow Current Draw.

Roadpro RP1259DLR Led Diamond Lense Cat Eye Mrk Lgt. Red $25.7 Replaceable High Impact SnapLock Lens13 LEDs on Printed Circuit Board. White Polycarbonate Body. Brightest Safest Light. Unique Cut Lens Maximizes Luminosity. Greater ShockResistance for Longer Life. Rated for 100 000 HoursLow Current Draw.

Ledra Duo LED Recessed Light by Bruck Lighting Systems $236 The Bruck Lighting Ledra Duo LED Recessed Light is a stylish fixture that disperses calmness in your room while accentuating its excellence. The Ledra Duo LED Recessed Light features metal body. Bruck Lighting, located in Tustin, CA, creates beautiful lighting products using pioneering innovation, design, and engineering. The Bruck Lighting Ledra Duo LED Recessed Light is available with the following: Included Features: Metal body. One J-box and LED Driver. ETL Listed. UL Listed.Energy Efficient.Options: Color: Warm White, or White. Finish: Chrome (shown), or Matte Chrome.Lighting: One 3 Watt 120 Volt LED lamp (included). Shipping: This item usually ships within 1 - 2 weeks. Dimensions: Fixture: Diameter 2.5 In., Height .5 In.

Ledra AL-J LED Recessed Light by Bruck Lighting Systems $252 The Bruck Lighting Ledra AL-J LED Recessed Light enlivens your room with a soft, intimate glow while instilling modern classiness and charm. The Ledra AL-J LED Recessed Light features borosilicate glass diffuser, aluminum body and Matte Chrome finish. Bruck Lighting Systems, founded in Germany in 1968, combines technologically-advanced lighting designs with innovative energy efficient light sources. The expansive lighting collection from Bruck ranges from flexible LED track lighting to hand-blown glass pendants to sleek display lighting. The Bruck Lighting Ledra AL-J LED Recessed Light is available with the following: Included Features: One dome-shaped, borosilicate glass diffuser. Aluminum body. Matte Chrome finish. One ceiling canopy. One J-box and LED Driver. ETL Listed. UL Listed for dry locations. UL Listed for wet locations.Energy Efficient.Options: Color: Amber, Blue (shown), Green, Red, Warm White, or White. Finish: Matte Chrome. Lens Option: Frosted Lens.Lighting: One 3 Watt 120 Volt LED lamp (included). Shipping: This item usually ships within 1 - 2 weeks. Dimensions: Diffuser: Diameter 2.25 In. Fixture: Height 2.62 In. Ceiling Canopy: Diameter 4.62 In.