Whelen Lights

Led Bars Running

Hot LED Accessories for your truck or SUV

Truth is, nobody knows exactly how much longer LEDs last than regular bulbs, but there are still LEDs in computers from the 70s that are happily blinking away with no ill effects.

Less Power
LEDs physically use less power than their incandescent counterparts and can output more light too. And that's about all there is to say on that. They use less power, so manufacturers can cram more of them in - for a brilliantly bright light.

The Cool Factor
Plus LEDs are the latest in lighting technology, so they look cool as hell. Remember back to the first time you saw the awesomely brilliant lights on the back of a Cadillac CTS fire up. In less than an instant the whole tail light bursted to brightness and you were blown away.

Light Bars

LED light bars have only been in the truck accessory marketplace for a few years. Basically, the LED Light Bar is either a 48-inch or 60-inch long strip of LEDs that fits in the dead space between the bottom of your tailgate and rear bumper. This strip of LED's can serve as a brake light, a running light, and even blink with your turn signals.

Installation can be as simple as plugging the light bar's plug into your trailer connection and using the supplied adhesive to attach the light bar. The light bars can be installed with sheet metal screws for permanent mounting, and some bars need to be hard-wired into your wiring harness.

Check out the Firestorm in action:

• LED Light Bars
• Fire & Ice Light Bar
• Firestorm Scanning LED Bar

Tail Lenses

Upgrading the tail lenses on your truck is always a good idea. They're affordable, they look great, and you want them. So why deprive yourself? But now you have an extra choice when picking out tail lenses - LEDs. As soon as new Caddies started coming with LED taillights the aftermarket started scrambling. They looked great, were brighter than anything before, and they lit up so fast they looked like alien technology.

There was some scrambling in the truck accessory marketplace for awhile, but the hobbyists and low-ballers have shaken out of the industry and there are some really superb LED tail lenses out there right now.

Check out the Technostalgia LED Conversion Kit: (for classic trucks)

About the Author

http://www.stylintrucks.com/

http://www.stylintrucks.com/sn.aspx?free_text=Tail+Lenses

Bully LED Step Bars $392.6 Bully Nerf Bars in stock now! Read Bully LED Step Bars customer reviews. AutoAccessoriesGarage.com has the best selection of Bully Running Boards & Side Steps at the lowest prices around. Bully LED Step Bars are chosen by auto enthusiasts everywhere to personalize their vehicles. Bully LED Step Bars available now at AutoAccessoriesGarage.

Light Bars $29.95 Custom Dynamics Light Bars Light up the night with 12 high-power dual intensity LEDs. In running light mode the LEDs?emit a low intensity but highly visible light.?Custom Dynamics Light Bars?are available?with?or without the Flashing Brake Alert mode.?When the brake on the Flashing Brake Alert model?is applied the LED will flash at a high intensity?for 5-6 seconds then go to a solid state until the brake is released. Both modes, running and brake, have been designed to create the maximum visibility. The unit is extremely easy to install with 3M tape and a 3-wire color coded electrical installation. Simply connect the Black wire to any ground wire, the Red wire to your existing brake light wire and the Blue to an existing running light power source. Works with any 12V DC electrical system without the need for load equalizers or resistors. Features: Features 12 super bright LEDs 3M double-sided tape for easy mounting 3-wire color coded easy-to-follow electrical installation "Knight Rider" side-to-side sequenced running light. Available in Non-Flash and Flash brake alert. Works with any 12V DC system No load equalizers or resistors required Dimensions: 4.7"L x .7"W x .7"H **Note: Knight Riderz Light bars can be wired independently, for example: If you only want to use the running light function simply cap off the brake light wire If you only want to use the brake light function simply cap off the running light wire

Pacer 49'' LED Tailgate Running Light Bar $34.95 The ultimate in safety style - install our ultra-bright LED light bars!   The unique line of lights light bar kit adds an aura of style, quality and safety.  Line of Lights Bar adds high visibility with 4 functions: Running Light - Brake Light - Left Turn Signal - Right Turn Signal. LED lights are sealed in a clear weather proof covering for long life.  Easy plug in installation. Just install with self stick tape to vehicle and plug in to standard 4 pin trailer connector.     Features: Weather-resistant black one-piece polymer LED housing Approximately 1" high bar mounts easily in the recessed area below your truck?s tailgate or any flat surface Superbright LEDs never burn out or need to be replaced Acts as a running light Lights up when you brake Right side flashes with right urn signal / left flashes with left 49'' wide; perfect for mid-size trucks Fits most vehicles Also known as the Line of fire led light bar

Pacer 60'' LED Tailgate Running Light Bar $39.95 The ultimate in safety style - install our ultra-bright LED light bars!The unique line of lights light bar kit adds an aura of style, quality and safety.  Line of Lights Bar adds high visibility with 4 functions: Running Light - Brake Light - Left Turn Signal - Right Turn Signal. LED lights are sealed in a clear weather proof covering for long life. Easy plug in installation. Just install with self stick tape to vehicle and plug in to standard 4 pin trailer connector.   Weather-resistant black one-piece polymer LED housing Approximately 1" high bar mounts easily in the recessed area below your truck?s tailgate or any flat surface Super-bright LEDs never burn out or need to be replaced Acts as a running light Lights up when you brake Right side flashes with right turn signal / left flashes with left 60" wide; perfect for full-size trucks Fits most vehicles

Knight Riderz Light Bars $29.95 Custom Dynamics Knight Riderz Light Bars Light up the night with 12 high-power dual intensity LEDs. In running light mode the LEDs sequence from side to side in a "Knight Rider" sequence. When the brake is applied the LED will flash for 5-6 seconds then go to a solid state until the brake is released. Both modes, running and brake, have been designed to create the maximum visibility. The unit is extremely easy to install with 3M tape and a 3-wire color coded electrical installation. Simply connect the Black wire to any ground wire, the Red wire to your existing brake light wire and the Blue to an existing running light power source. Works with any 12V DC electrical system without the need for load equalizers or resistors. Features: Features 12 super bright LEDs 3M double-sided tape for easy mounting 3-wire color coded easy-to-follow electrical installation "Knight Rider" side-to-side sequenced running light. Flashing brake alert Works with any 12V DC system No load equalizers or resistors required Dimensions: 4.7"L x .7" W x .7"H **Note: Knight Riderz Light bars can be wired independently, for example: If you only want to use the running light function simply cap off the brake light wire If you only want to use the brake light function simply cap off the running light wire If you want to use the sequential function as the a brake light instead of a running light then connect it to your brake light wire and cap off the Knight Riderz brake light wire.

Brooks Mens Nightlife Hat $24 This hat eliminates excuses (you know, like darkness and rain) to miss a run. The ultimate running partner for nighttime and wet-weather runs, it features water-resistant, high-visibility fabric and 360 degrees of retroreflectivity. The cherry on top (or on back): A flashing rear L.E.D. light. • Fit: One size fits all • High-visibility fabric, flashing rear L.E.D. light, and 3M™ Scotchlite™ retroreflective piping dramatically enhance visibility • Fabric provides weather protection • Adjustable hook-and-loop backstrap Washing Instructions: • Remove the L.E.D. before washing: Lift off the red lens, being careful to not dislodge the small rubber plunger that activates the on/off switch. • With a pointed object, remove the circuit board. • Hand wash with mild soap and warm water. Hang to dry. • Be sure that the black plastic casing is dry before replacing the circuit board. • Replace the circuit board and red lens. The small rubber plunger must be securely housed in the center of the red lens to assure proper activation. Replacing the battery: • Gently lift off the red lens, being careful to not dislodge the small rubber plunger that activates the on/off switch. • With a pointed object, gently remove the circuit board. Two small LR41 watch batteries are housed on the back of the circuit board. • Slide each battery out of the holster towards the outside edge of the circuit board. • Slide in the new LR41 batteries, positive side up. • Replace the circuit board, making sure that it lies flat. Gently slide red lens with plunger back into the black plastic casing. • The flashing light on your NightLife Cap will work for approximately 200 hours before requiring battery replacement. Proper care will ensure the longest possible life.Fabric: Aireplex (100% polyester microfiber with Teflon Durable Water Repellent finish) is soft, lightweight, and wind- and water-resistant for comfortable...

Brooks Mens Nightlife Hat, Nightlife, OSFA $24 This hat eliminates excuses (you know, like darkness and rain) to miss a run. The ultimate running partner for nighttime and wet-weather runs, it features water-resistant, high-visibility fabric and 360 degrees of retroreflectivity. The cherry on top (or on back): A flashing rear L.E.D. light. • Fit: One size fits all • High-visibility fabric, flashing rear L.E.D. light, and 3M™ Scotchlite™ retroreflective piping dramatically enhance visibility • Fabric provides weather protection • Adjustable hook-and-loop backstrap Washing Instructions: • Remove the L.E.D. before washing: Lift off the red lens, being careful to not dislodge the small rubber plunger that activates the on/off switch. • With a pointed object, remove the circuit board. • Hand wash with mild soap and warm water. Hang to dry. • Be sure that the black plastic casing is dry before replacing the circuit board. • Replace the circuit board and red lens. The small rubber plunger must be securely housed in the center of the red lens to assure proper activation. Replacing the battery: • Gently lift off the red lens, being careful to not dislodge the small rubber plunger that activates the on/off switch. • With a pointed object, gently remove the circuit board. Two small LR41 watch batteries are housed on the back of the circuit board. • Slide each battery out of the holster towards the outside edge of the circuit board. • Slide in the new LR41 batteries, positive side up. • Replace the circuit board, making sure that it lies flat. Gently slide red lens with plunger back into the black plastic casing. • The flashing light on your NightLife Cap will work for approximately 200 hours before requiring battery replacement. Proper care will ensure the longest possible life.Fabric: Aireplex (100% polyester microfiber with Teflon Durable Water Repellent finish) is soft, lightweight, and wind- and water-resistant for comfortable...

Brooks Womens Nightlife Hat $35 Updated with even more 3M™ Scotchlite™ retroreflectivity, a perforated bill and a flat L.E.D. light to keep you visible in any condition and lighten your load. Its removable battery pack makes it easy to replace batteries and wash your hat, while also doubling as a portable pen light. • Fit: One size fits all • High-visibility fabric, flashing rear L.E.D. light, and 3M™ Scotchlite™ retroreflective piping dramatically enhance visibility • Fabric provides weather protection • Adjustable hook-and-loop backstrap Fabric: Aireplex (100% polyester microfiber with Teflon Durable Water Repellent finish) is soft, lightweight, and wind- and water-resistant for comfortable protection from the elements.

Brooks Womens PR Mesh Skort II $48 We've taken our popular 2-in-1 mesh skort and made it even better with extra length and improved grippers on the hem of the inner short. Style, performance, fit -- what else is there? Wear it anywhere your active day takes you... even upside down on the monkey bars. • Fit: Semi-fitted • 14" outseam, 4½ inseam on inner short • Knit mesh shell for full range of motion • Moisture transfer liner short with comfortable silicone gripper hem so they don't ride up • Back yoke zip pocket holds gel packets • Hidden pocket on short for I.D./mad moneyBrooks Equilibrium Fabric: Main Body: PR Mesh Stretch (92% moisture-transfer polyester/8% spandex mesh); Liner: 84% moisture-transfer polyester/16% spandex; Gusset Liner: 94% moisture-transfer polyester/6% spandex

Pilot Nerf Bars - S.S. w/ LED [01-Up Chevrolet Silverado 1500/2500/3500HD Crw Cab 4 door] $646.07 "This side bar features a 24"" Red L.E.D. light strip that is flush mounted into a stamped channel on the bar to enhance safety. It includes a 12 ft. wiring harness with built-in circuitry that easily connects to your front turn signals, offering a steady stream of running lights which flashes with your turn signals."