Whelen Lights

Headlight Lens

Pittman Original One Step Acrylic Lens Restorer (A L R)

The construction of todays headlight varies in shape and construction.

No longer flat or convex as a rule, the new shapes are designed to complement the shape of the individual vehicle it is attached to.

While this increases their beauty it also escalates their cost.

Naturally occurring oxidation will form over the lens and cause clouding.

Without a system in place to combat this problem your headlights will go from clear to cloudy to opaque.

A perfectly working headlight can be rendered useless by oxidation, but oxidation can be removed instantly with an acrylic lens deoxidizer.

The problem is there are so many products on the market to address the problem of oxidation that rely solely on abrasives like sandpaper and rubbing compound.

These things will destroy the surface of a modern acrylic headlight lens.

Abrasives are designed to remove scratches by hiding the scratch with more scratches. This archaic method is unacceptable for todays acrylic headlight lens.

Some headlights have a thin protective costing over them to protect them from the yellowing effects of the suns Ultra Violet rays.

Some have this protection built in.

This surface will oxidize but it can be restored to clarity instantly with an acrylic lens deoxidizer. It can also be prevented from oxidizing with the use of an acrylic conditioner (APC).

Some say call the worn surface "bad plastic and say it has to be removed". This is a mistake. Scratches and pits from normal driving do not block light projection. They are not the problem, Oxidation is the problem and it can coat the surface within a year.

However if this protective surface is removed or destroyed while removing the oxidation with abrasives, it will cloud, yellow and oxidize again and this time, while the oxidation can still be removed there is no recovery from the yellowing caused by the absence of UV protection. Your lens will have to be replaced.

Even when the UV protection is built in, abrasives can damage the surface of the lens beyond repair by clouding it with scratches.

Sure is some cases a headlight cleaned with an abrasive or sandpaper kit will look better for a short time, but the damage will eventually show through.

Sealers sold with these kits are designed to covet the visible damage that you cannot hide with sanding and polishing.

Generally these kits have no UV protection, apply thickly and will yellow and crack on your headlight leaving it in even worse condition.

Even a damaged UV layer is better than no UV layer and far superior to the aftermarket sealers sold with these damaging abrasive headlight sanding kits.

Pittman Original One Step ALR was designed to address this problem of reoccurring acrylic lens oxidation at the molecular level. Pittman ALR is a 100% non abrasive pure liquid acrylic lens deoxidizer.

It will safely remove all forms of oxidation no matter how thick on contact.

It will not damage the surface

It will not damage the UV protection

It works instantly

It can be used in all temperatures

It will not freeze

It is highly concentrated.

It only takes one drop in most cases

It can be applied to acrylic / plastic headlights of all shapes.

It can be used over and over with no damage to the headlight and instant removal of oxidation.

Used along with VaporWax acrylic paint conditioner (APC), Pittman ALR APC 360ID can remove and prevent oxidation from forming on any acrylic surface.

Highly recommended for the preservation of the lens surface on new and old cars.

Guaranteed to safely remove oxidation on contact and NOT alter or cause damage to the surface of the acrylic headlight lens.

There is no other product on the market that can make that claim.

Pittman One Step ALR is not a common scratch remover or polish.

Pittman KMOD invented the acrylic lens deoxidizer and the Acrylic paint conditioner.

About the Author

Kemetian Motif Original Designs (KMOD) est. 1989 creator / distributor of: Pittman's Original One Step Acrylic Lens Restorer (ALR).  Pittman's Original One Step Acrylic lens Restorer / KLR CUT ASD 360U Acrylic Surface Deoxidizer, Pittman's Original VaporWax Acrylic Paint Conditioner (APC).  KMOD's ALR / 360ID ( Alien Liquid Research / 
360 Infinite Design )  division, creates the most advanced acrylic restoration products in the market today. Pittman's Original One Step ALR is sold and recognized world wide uniquely, as the Original pure liquid non abrasive thermoplastic lens de-oxidizer.  Pittman's One Step and VaporWax are not commercially produced or sold in any stores. Pittman's Original One Step, VaporWax and KLR CUT are molecular reactive designer products exclusively produced in controlled amounts for private accounts and distributed world wide via KEMETIAN MOTIF ORIGINAL DESIGNS: KMOD ALR ASD APC 360 INFINITE DESIGN / Jerry Pittman chief designer.

Delta DOT Headlight Lens/Reflector $33.99 Delta DOT Headlight Lens/Reflector

Headlight Assembly $227.99 Headlight Assembly; Crystal Lens; Black;